Power Maxed Tank Repair Epoxy Putty 57g

Power Maxed Water Tank Repair Putty moulds like clay and can be used to repair fittings, pipes, electrical connections, leaking gaskets, water tanks, fish boxes, tubs, battery cases, sinks, spas, hot tubs, tanks and pools to form custom gaskets etc. It can also be used to patch scratches, cuts and holes in fibreglass, metal and wooden boat decks and hulls.

Each handy stick contains pre measured portions of activator and base throughout, no measuring or mixing tools are necessary. As the epoxy is mixed, the two contrasting colours blend into one colour to indicate complete mixing. Power Maxed Water Tank Repair Putty contains a fading green dye and becomes white after mixing. The consistency eliminates drips and runs, facilitates adhesion to the substrate, and allows the material to be shaped and formed as needed before curing begins. Once cured, Power Maxed Water Tank Repair Putty can be drilled, sawed, carved, sanded or painted.

Suitable for interior or exterior use, it is resistant to water, chemicals, and temperature extremes. Power Maxed Water Tank Repair Putty contains no solvents or VOCs. It's non flammable and releases no noxious fumes. It won't shrink or pull away. The unused portion stays fresh for future use when saved in its original package.

• Damp, Wet Areas and Underwater
• Rebuilding Holes
• Repairing Leaks

• Upper Temperature Limit Continuous (°C): 120
• Upper Temperature Limit Intermittent (°C): 150
• Store Out Of Direct Sunlight In Temperatures Between 5°C and 20°C
• Always Wear Rubber Or Plastic Coated Gloves When Dealing With This Product
• Colour When Fully Cured: White

Working Time 15 minutes

Functional Cure - 30 minutes

Full Cure - 1 Hour

Directions For Use:

1. CUT: Remove required amount of putty
2. MIX: Thoroughly knead putty with fingers to a uniform colour
3. APPLY: Press putty firmly to the surface to be repaired