C4: Front Only - 4/0: 500

C4: Front Only - 4/0: 500
Hover over image to zoom
Product Information

C4 TEMPLATES (Adobe CC / PDF / PSD / Quark) available HERE


 

C4 Envelopes  Artwork Set-up + Options

  • No registration marks are required! Supply PDF as ACTUAL SIZE only.

    C4 TEMPLATES (Indesign + Quark) are HERE

Printing:

  • Supply as actual size, press-ready PDF only, at actual size of 324mm x 229mm (no reg. marks reqd).
  • Best to keep a minimum of 10mm clear zone all around on C4 for best results.
  • Bleed is NOT available on C4 (we can print one edge but for best results are we advise not to!)

PEEL & SEAL – 120gsm P&S White – standard product

  • Peel & Seal Flaps are LONG-EDGE Wallet only.
  • Flap depth on reverse is 35mm deep on C4 Plain (2019 spec); 45mm deep on C4 Window (2019 spec)
  • Flap is DOWN by default.
  • C4 Window (a portrait variant) has Window Dimensions of 105mm x 40mm deep, positioned 25mm from Left edge and 71mm from Top Short edge. Remember this is still a LONG-EDGE Wallet Flap.

C4 SELF-SEAL / MACHINABLE MAILING / POCKET FLAP  — N/A

 

ARTWORK NOTES:

  • No registration marks are required. Supply PDF as ACTUAL SIZE only.
  • Bleed is NOT available on C4 (we can print one edge but for best results are we advise not to!)
  • Set all artwork to CMYK (no Grayscale or RGB allowed as colour shifts will occur) for best results. Any existing spot colour Pantone ink references should be converted completely to CMYK only.
  • If picking the C4 Window variant, you must leave 5mm Clear Zone around Window area!
  • Bottom edge needs 15mm Clear Zone and 5mm all around other three sides.
  • Convert all Fonts to paths/outlines before making PDF.
  • Avoid text less than 5pt. Avoid Serif fonts under 6pt.
  • Printing cannot occur on any of the edges or creases, as the envelope is Over-printed only (and not flat-sheet).

Size:

  • C4 Plain (324mm wide x 229mm high -- as Landscape orientation).
  • C4 Window (229mm wide x 324mm high -- as Portrait orientation with window in top left).
  • Save your PDF as actual size (NO crop or reg. marks!) at canvas size of 324 x 229 only.

Flap Type:

  • Flap depth on reverse is 35mm deep on C4 Plain; 45mm deep on C4 Window.
  • Peel & Seal Flaps are Long-Edge Wallet only. [Short-edge Pocket not available]
  • Flap is DOWN by default.

Bleed to Edges:

  • Bleed is NOT available on C4.

Thus keep all text and important images minimum 10mm away from canvas edges on both sides.


Special Note: 

Ink will run if it gets wet! These are not intended to be used in continuous outdoor environment. Given the nature of envelopes, the paper and content should remain dry. Please manage your customers' expectations in lieu.

 

Ink Coverage:

Standard 30% INK COVERAGE:

  • Usually that means a Busn Reply + Small logo block + text, or partial tint with lighter colours over part of the canvas.
  • Majority of the canvas is left blank White.

OPTIONAL 60% HEAVY INK Coverage:

  • Upgrade from Standard allowing for partial photo + logo block, but leaving 40% White area free. Full Colour not available. Big areas of SOLID colour do NOT work well with this process.

Bleed is NOT available on C4 (we can print one edge but for best results are we advise not to!)

E-mail your Artwork PDF to mark@tradeprintinguk.com first is you're unsure.

 

All Text & Images above are Copyright Trade Printing Group Ltd © 2017

...